PHASE I:
Frame Package ...................….$4,995

The foundation of any high performance automobile is the frame. Classic Roadsters engineers have invested countless research hours to develop a frame which not only delivers real performance handling, but also allows you to use inexpensive and readily available components to complete your chassis. The result: using a stock Mustang suspension and stock 302 HO with 5-speed. A factory team won the all-industry auto-cross competition in ’91, ’92, ’93 and ’95. Since then, many customers have continued the tradition taking home first place trophies.

Frame Components:

1. Powder Coated Frame
2. 4 Point Harness Mount
3. Full-length 2” x 4” formed rails with 1” x 3” outriggers
4. Custom front cross member for stock Mustang II front end components
5. Universal engine and transmission mounting plates
6. Front sway bar mounting plates
7. Heavy-duty front end rear bumper mounts
8. Rear frame accepts stock Mustang coil spring differential
9. Custom lower control arms for 4-bar differential linkage
10. Heavy-duty cowl reinforcement frame with mounts for steering column and wiper motor
11. Motor mount brackets (specify engine)
12. Transmission cross-member (specify transmission)
13. Radiator support frame and frame mounting plates
14. Custom pedal set for power or manual brakes
15. Steering column extension package
16. Battery hold-down system
17. Phase I fastener package
18. Firewall with reinforced pedal mount and battery shelf
19. Left and right side pipes (unpainted single tube collector type)
20. 19-gallon fuel tank with sender and mounting straps with hardware
21. State of the industry wiring harness system. Offers simplicity and unmatched dependability.
22. Classic Roadsters’ comprehensive assembly manual package with hundreds of pictures and illustrations. Guaranteed the best instruction manual in the industry.

PHASE II:
Body Package ….........................$5,595
Back to Top

Classic Roadsters has always been known for the high quality of our fiberglass. Steel alignment pins in our breakaway molds not only mean minimum parting line distortion, but also minimum body preparation prior to painting. Our bodies also feature turned back edges at the fender wells for increased strength and a solid look. The result is the most beautiful automobile finish possible for the most reasonable cost.

Body Components:
Note: Components number 1 - 4 are pre-finished and laminated into the one-piece body before it is taken from the mold. The result is a precise fit, increased strength and a professional look you can expect from Classic Roadsters.

1. Left and right front fender liners
2. Trunk compartment
3. Defroster plenum and firewall tie-in
4. Upper radiator air scoop
5. Firewall close-off panels
6. Boot area tie-in with rear floor-pan
7. Hood with laminated inner liner (specify carbureted or EFI)
8. Left and right doors with laminated inner liners
9. Left and right rear fender liners
10. Trunk lid with laminated inner liner
11. Hood latch box
12. Transmission access cover
13. Foot well kick panels
14. Lower radiator scoop
15. Heavy-duty steel door hinge sets (2)
16. Heavy-duty steel side guard beams, jig-welded and installed in each door
17. Door latch to support frame brackets
18. laser cut and jig-welded hood and trunk hinges
19. Approved door latches and door latch cables
20. Door strikers
21. Trunk latch
22. Authentic chrome-plated brass windshield frame assembly with safety glass windshield
23. Phase II body fastener package

PHASE III:
Completion Package …...................$2,995
Back to Top

The remaining components of your 427 must also be high-quality and correctly engineered to deliver the fit and finish common to satisfying automobiles. We believe our commitment to quality is visible from the hand stitched pleats in every bucket seat to the usually unnoticed edging which completes your carpet set. Beyond good looks, door openings are larger by nearly six inches, seats are recessed into the frame for four inches more headroom, and leg room has been stretched by five inches. If you could have experience the tiny door opening, cramped quarters, and angled seating of the original Cobra 427s, you would realize that comfort was not a concern in the original models. But we have made it a major concern in the Classic 427 to give you the most comfortable and functional 427 in the business. You too, will appreciate the enhancements of this fine automobile.

Completion Components

Interior

1. Deluxe hand-crafted leather-grain vinyl bucket seats
2. Deluxe leather-grain door panels with map pockets
3. Authentically-styled fiberglass dash with vinyl cover
4. Complete carpet set: pattern cut, edged and ready to install
   a.) Kick panel covers
   b.) Boot area
   c.) Floor and firewall
   d.)Trunk area

Lights

1. Left and right headlight assemblies with sealed beams and chrome bezels
2. Left and right front signal lights
3. Left and right rear running lights
4. Left and right rear turn signal lights
5. License plate light

Miscellaneous

1. Flip-up 3” gas filler cap with vent and approved flexible hose with clamp
2. Adjustable seat tracks
3. Adjustable rubber stoppers for precise hood fit (4)
4. Extruded rubber edge seal for trunk

KIT OPTIONS & ACCESSORIES | Back to Top

1. Top Grade Leather Interior .....................….$1,295
   Covering seats, doors and dash for those individuals who truly enjoy the luxury of being surrounded by the feel and smell of leather. Upgraded package, priced in lieu of standard vinyl interior.
2. Custom Dash .......................................….$295
   With center console and glove box with door
3. Steering Column …....................................$750
   Tilt steering column with GM connection. Cobra steering wheel and dash mounted ignition switch
4. Heater, Ventilation and Defroster Module ….$395
   Includes under-dash defroster plenums, defroster tubes, mounting brackets, hoses and dash controls
5. 6 Gauge Dash Set with Lights/Switches ….$495
   One set of 427 gauges, including 120 mph speedometer, tachometer, water temperature, oil pressure, fuel gauge, sending units and extra length speedometer cable. Must specify Ford or Chevy engine
6. Heavy-Duty Cooling .............................….$695
   Heavy-duty “Griffin Super II" cross flow aluminum race radiator with warranty, automatic transmission cooler, in line filler neck, overflow system and more over-all capacity. Includes 17”, 2100-cfm thermostatically-controlled fan and shroud assembly and coolant recovery kit with mounting hardware
7. Custom Headers …..................................$495
   With gaskets and header bolts, available for Ford 302, 351 Windsor and Chevy 350 engines
8. Big Block Headers …...............................$545
   For Ford and Chevy
9. Performance Handling Package …............$395
   For increased cornering ability. Includes front and rear powder coated sway bars with mounting hardware
10. Cosmetic Three-Point Roll Bar .............….$295
    Passenger Side ..................................….$295
    Paint or plating by customer
    Stainless Steel …....................................$495
11. Roll bar Bezel Kit ................................….$150
    Polished Aluminum
12. Hood Latch Package ...........................….$145
    Includes all cables, fasteners, upper and lower latches
13. LeMans-Style Flip-Up Gas Cap ….............$275
    5” diameter, authentically styled chromed gas cap with fiberglass body recess and all mounting hardware
14. Convertible Top …....................................$1,595
    High visibility Haartz cloth soft-top with frame assembly, windshield header, and 3-section rear window. Full-framed side curtains with socket-type door mounting hardware. See brochure for color selection
15. Tonneau Cover ....................................….$275
    Heavy-duty vinyl cockpit cover. A convenient alternative to raising and lowering the convertible soft-top. Provided with zippered center. Must state with or without roll bar when ordering
16. Four-Point 2” or 3” Seat Belts …....... ........$295
    With mounting hardware
17. Trim Package …......................................$595
    Rear fender rock guards, stainless steel side louver vents. Heavy-duty front and rear stainless steel bumperettes with mounting tubes and grommets (4). Left and right windwings. Dash rearview mirror. Chrome bullet racing mirrors, pre-cut polished sun visors and all mounting hardware.
18. Backup Lights …......................................$50
19. Seat Options
    Wide Boy Seats ............................….ea. $125
    2” Wider
20. Wiper Motor Assembly ….....................$445
    Includes arms, blade arms and all mounting hardware
21. Hardtop …...............................................$1,795
    In sandable gelcoat with headliner kit, weather stripping and mounting hardware
22. Ride Enhancement Package ................….$295
    For optimum ride and comfort without sacrificing performance. Includes front and rear coil springs

MONEY BACK GUARANTEE
Within 10 days of receiving your kit, if you do not find superior quality components, you may request a refund of your purchase price exclusive of freight or damage.

Prices effective 1/1/2004 subject to change without notice. Classic Roadsters II reserve the right to substitute components of equal or greater value.

All parts and accessories ordered AFTER the kit has been shipped are subject to increased packaging, handling and ground shipping charges.

You should check with your state motor vehicle department before registering your complete kit assembly.

Back to Top

Classic Roadster is a dealer of classic car kits that make it easy for you to put together from the bottom up. Cars include C-427, Sebring MX, HDR 427 FIA Roadster, and the Badlands RT along with others.

Classic Roadsters II 39342 Cty Rd 185 Sauk Centre, MN 56378 | 320-352-3696 Fax: 320-352-3841 E-mail Classic Roadsters

Martin Bydalek photos except for Badlands & Sebring MX © 2004
Site maintained by Linked Media Group.